Scene File; Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

4-4. Scene File

Scene File stores data in the camera and memory stick.
It also stores in the IC memory card if the MSU (master setup unit) is used. For the details, refer to the
MSU operation manual.
Storing and calling data are implemented using the setup menu or MSU.
Scene files can be copied between cameras using the memory stick.
m
. Scene Files are files for storing the differences from the Reference File. Therefore when the Reference
File is changed, output of the Scene File item corresponding with the item changed in the Reference
File is also changed.
. Before storing the data in the memory stick, make sure that the LOCK switch on the memory stick is in
OFF position.
Storing (Refer to step 1 of Fig.4-3.)
Using PAINT Menu of This Unit
(1) Change the scene file item to the desired value.
(2) [PAINT] → [SCENE|FILE] → [STORE]
Select the scene file number to be stored.
With MSU
(1) Change the scene file item to the desired value.
(2) Press "STORE" of the scene file, and press the STORE number.
Calling and Clearing the Call (Refer to step 2 of Fig.4-3.)
Using PAINT Menu of This Unit
Select the scene file number to be called on the "SCENE FILE" page. A file currently being called is
shown with its file number highlighted. Select the number again to cancel the call and resume the previ-
ous status.
With MSU
Press and light up the SCENE FILES button of the desired number when the STORE button is dark. Press
the lit button again to turn it dark and resume the previous status.
4-4 (E)

BVP-E30/E30P M-V1