Extending The Ccd Block; Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

1-14-3. Extending the CCD Block

Tools: Flexible card wire (30P, 140 mm) ( 2 pieces)
EX Harness (3 pieces)
Tweezers
1. Remove the CCD block. (Refer to Section 2-1-1.)
2. Remove the NR-72 board. (Refer to Sections 2-1-1
and 2-1-3.)
3. Replace the two flexible card wires connected to CN2
and CN3 on the MB-953 board and CN1 and CN2 on
the NR-72 board with the wires of 140 mm in length
respectively.
Return the NR-72 board to the normal position.
MB-953 board
CN2
CN3
B2.6 x 4
Flexible card wires
(140 mm)

BVP-E30/E30P M-V1

NR-72 board
CN1
CN2
4. Connects the three EX harnesses between the connec-
tors CN4, CN5, CN6 on the MB-953 board and the
three harnesses connected the CCD block.
EX Harness
CN4 R
CN5 G
CN6 B
CN5
CN4
CN6
MB-953 board
EX Harness
CCD block
5. Return the DPR-261 board to the normal position.
Red
Yellow
Blue
1-21 (E)