Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

SWITCH ASSIGN 2 page
<SWITCH ASSIGN2>
LENS VTR S/S : RET2 SW
CAM VTR S/S : RET2 SW
ASSIGNABLE : 5600K
DIMMER: 5
HANDLE SW : RET/INCOM1
ZOOM SPEED: 50
Item Setting
LENS VTR S/S (BVP-E30/E30WS)
RET1 SW
RET2 SW
INCOM1
INCOM2
(BVP-E30P/E30WSP) INCOM 2 : Microphone switch of intercom 2 line
RET1 SW
RET2 SW
ENG
PROD
CAM VTR S/S (BVP-E30/E30WS)
RET1 SW
RET2 SW
INCOM1
INCOM2
(BVP-E30P/E30WSP) INCOM 2 : Microphone switch of intercom 2 line
RET1 SW
RET2 SW
ENG
PROD
ASSIGNABLE 5600K, ATW
CROP, __
DIMMER 0 to 9
HANDLE SWITCH (BVP-E30/E30WS)
RET/INCOM1
RET/INCOM2
ZOOM, __
(BVP-E30P/E30WSP)
RET/ENG
RET/PROD
ZOOM, __
ZOOM SPEED 00 to 99, __
3-10 (E)
Description
Assigns any of the following to the lens VTR S/S switch.
Note : This item can be set only when the CCU is connected.
RET1 SW : RET1 switch (According to switch setting of CA.)
RET2 SW : RET2 switch (According to switch setting of CA.)
INCOM 1 : Microphone switch of intercom 1 line
ENG : Microphone switch of ENG line
PROD : Microphone switch of PROD line
Assigns any of the following to the camera VTR S/S switch.
Note : This item can be set only when the CCU is connected.
RET1 SW : RET1 switch (According to switch setting of CA.)
RET2 SW : RET2 switch (According to switch setting of CA.)
INCOM 1 : Microphone switch of intercom 1 line
ENG : Microphone switch of ENG line
PROD : Microphone switch of PROD line
Assigns any of the following to the assignable switch.
Factory setting : 5600K for BVP-E30/E30P
"__" for BVP-E30WS/E30WSP
5600K : 5600K mode (realizing color temperature of 5600K
electrically) ON/OFF switch
ATW : automatic tracking white balance ON/OFF switch
CROP : 4 : 3 aspect ratio setting switch (BVP-E30WS/E30WSP only)
__ : No function.
Sets the brightness of the assignable switch.
Assigns any of the following to the handle switches.
RET/INCOM1 : (Front side) RETURN 1 switch
(Rear side) Microphone switch of intercom 1 line
RET/INCOM2 : (Front side) RETURN 1 switch
(Rear side) Microphone switch of intercom 2 line
RET/ENG : (Front side) RETURN 1 switch
(Rear side) Microphone switch of intercom ENG line
RET/PROD : (Front side) RETURN 1 switch
(Rear side) Microphone switch of intercom PROD line
ZOOM : Sets the lens zoom operations. Front is TELE and
rear is WIDE. (Can be set only for serial communica-
tion compatible lens)
__ : No function
Sets the zoom speed when the handle switch function is set to ZOOM.

BVP-E30/E30P M-V1