Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

DETAIL 2 page
<DETAIL 2>
H/V RATIO : 0
FREQ : 0
MIX RATIO : 0
FINE DTL : 0 : OFF
KNEEAPT : 0 : OFF
DTLCOMB : 0
Item Setting
_99 to 99
H/V RATIO
FREQ _99 to 99
MIX RATIO _99 to 99
FINE DTL 0 to 99
ON, OFF
KNEE APT _99 to 99
ON, OFF
DTL COMB _99 to 0
ABS Execute by pressing
the MENU SELECT
knob.
a) This function compensates for decreases by the knee aperture in the detail level at the high luminance level part of the camera
subject.

BVP-E30/E30P M-V1

ABS
Description
Sets the mix ratio of the H detail signal and V detail signal.
Sets the frequency of the H detail signal.
Sets the mix ratio of the H detail signal before and after the gamma
correction circuit.
Adjusts the thickness of the detail waveform.
Sets the fine detail function to ON or OFF.
Sets the knee aperture a)
Sets the knee aperture a)
Sets the effective amount of the comb filter to eliminate the cross color
of the detail signal.
Selects the ABS (absolute) mode.
To set the ABS mode to ON :
Press the MENU SELECT knob and highlight "ABS".
In the ABS mode, values are highlighted so that the absolute values
can be checked.
To set the ABS mode to OFF :
Press the MENU SELECT knob again.
level.
function to ON or OFF.
3-19 (E)