Table of Contents
Advertisement
Installation
Warning: Before installation, ensure the device is disconnected from the power source. The VPX-1701 can be placed on a solid
and stable surface or installed in a standard equipment rack.
Installation:
1.
Attach the installation bracket to the enclosure using the screws provided.
2.
The bracket is attached to the enclosure as shown.
3.
Repeat steps 1-2 for the other side of the unit.
4.
Install the unit in the mounting rack with user supplied screws.
Wiring
Warning:
•
Before wiring, disconnect the power from all devices.
•
Connect and disconnect the cables with care.
1.
Connect the video source
Connect the VGA and HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc) to the VGA IN and HDMI IN
ports of the VPX-1701.
2.
Connect HDMI OUT
Connect an HDMI display device (such as TV, projector, LED/LCD display) to the HDMI OUT of the VPX-17401.
3.
Connect AUDIO OUT
Connect an audio receiver (e.g. an amplifier) to the AUDIO OUT of the VPX-1701.
4.
Connect HDBT OUT
Connect HDBT OUT of VPX-1701 to HDBT IN of an HDBT receiver with a Cat 5e/6/6a/7 cable.
5.
Connections for additional control options:
•
LAN control (NetLinx/Telnet/Web UI): Connect a Local Area Network to the LAN port of the VPX-1701.
•
Input source switching control: Connect a keypad and LEDs to CONTACT IN and TALLY OUT ports for input switching and
tally indication.
•
USB control: Connect a USB host to the VPX-1701, and USB devices to the HDBT receiver for remote KVM control.
•
RS232 pass-through: Connect an RS232 master device (or slave device) to the RS232 port of the VPX-1701, and an
RS232 slave device (or master device) to the RS232 port of the remote receiver for bidirectional RS232 pass-through.
•
IR pass-through: Connect an IR emitter (or IR receiver) to the IR connector of the VPX-1701, and an IR receiver (or IR
emitter) to the IR connector of the HDBT receiver for bi-directional IR pass-through.
6.
Connect the AC power cord provided to the VPX-1701.
One-way PoE enables the VPX-1701 to power the remote HDBT DSC receiver along a single Cat X cable. No additional power
adapter is required at the receiver.
7.
Power on all attached devices.
When all connections are made and power is ON, check if all LED indicators on the VPX-1701 are normal to ensure installation is
successful. For LED indication, please refer to Panel Description section.
User Manual - VPX-1701
12
Advertisement
Table of Contents
