Edit 802.1X Settings; Technical Reference - ZyXEL Communications VMG4381-B10A User Manual

6.5.1 Edit 802.1x Settings

Use this screen to edit a 802.1x authentication's settings. Click the Edit icon next to the rule you
want to edit. The screen shown next appears.
Figure 29 802.1x: Add/Edit
The following table describes the labels in this screen.
Table 15 802.1x: Add/Edit
LABEL
Active
Interface
EAP Identity
EAP method
Enable
Bidirectional
Authentication
Certificate
Trusted CA
Apply
Cancel

6.6 Technical Reference

The following section contains additional technical information about the Device features described
in this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The Device can work in bridge mode
or routing mode. When the Device is in routing mode, it supports the following methods.
Chapter 6 Broadband
DESCRIPTION
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Select the interface that uses the authentication.
Enter the EAP identity of the authentication.
This is the EAP method used for this authentication.
Select this to allow bidirectional authentication.
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG4381-B10A User's Guide
96