Table of Contents
Advertisement
35.2.1 Email Notification Edit
Click the Add button in the Email Notification screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 151 Email Notification > Add
The following table describes the labels in this screen.
Table 119 Email Notification > Add
LABEL
Mail Server
Address
Port
Authentication
Username
Authentication
Password
Account E-mail
Address
Connection
Security
OK
Cancel
Chapter 35 E-mail Notification
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail address specified in the
Account Email Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Enter the same port number here as is on the mail server for mail traffic.
Enter the user name (up to 32 characters). This is usually the user name of a mail account you
specified in the Account Email Address field.
Enter the password associated with the user name above.
Enter the e-mail address that you want to be in the from/sender line of the e-mail notification
that the VMG sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated by
the mail server as well.
Select SSL to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want
encrypted communications between the mail server and the VMG.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
Click this button to save your changes and return to the previous screen.
Click this button to begin configuring this screen afresh.
VMG3925-B10C/B30C User's Guide
263
Advertisement
Table of Contents
