Table of Contents
Advertisement
1.
IntroduCtIon
1.1
gEnErAl
Congratulations on choosing the Kemparc™ pulse welding equipment. used correctly,
Kemppi products can significantly increase the productivity of your welding, and provide
years of economical service.
this operating manual contains important information on the use, maintenance and safety of
your Kemppi product. the technical specifications of the equipment can be found at the end
of the manual.
please read the manual carefully before using the equipment for the first time. For your
own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
the specifications presented in this manual are subject to change without prior notice.
Important notes
items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the
their instructions.
1.2
ABout KEmpArC pulsE produCts
Kemparc pulse 350 and 450 are CC/CV welding power sources designed for demanding
professional use. they are suitable for synergic pulsed mig/mag, synergic 1-mig/mag
and basic mig/mag. K 60 setup panel is included in the delivery for selecting, setting and
managing the welding system prior to and during system use.
Kemparc pulse 350/450 product range offers both technical and commercial welding
solutions matching a wide range of applications from sheet metal fabrication to heavy
industry segments.
Kemparc Dt 400 is a wire feeding device that feeds welding wire to the welding robot at the
speed it requires at any time. For more information on using the wire feeder and its functions,
see "Wire feeder".
notation. read these sections carefully and follow
'NOTE!'
EN
3
Hide quick links:
Advertisement
Table of Contents
