ADF clutch
1.
Remove the ADF main feed unit. See
2.
Remove the clip (A) securing the ADF clutch to the transport roll shaft.
3.
Slide the clutch off the shaft.
ADF hinge
1.
Remove the ADF unit from the scanner assembly.
2.
Place the ADF unit upside down on a non-marring surface.
3.
Remove the four screws (A) the secure the hinge to bottom of the flatbed cover.
"ADF main feeder" on page
4-134.
Repair information
7541-03x
Previous
Next
Go Back
4-137