Table of Contents
Advertisement
Main fan removal
1.
Remove the HVPS.
2.
Remove the rear fan. See
3.
Disconnect the engine board fan cable from the engine board.
4.
Disconnect the main fan cable from CN22 on the engine board.
5.
Remove the screw (A) fastening the main fan stay to the left EMI shield.
6.
Remove the screw (B) fastening the main fan stay to the rear of the printer frame.
"Rear fan" on page
4-102.
7541-03x
4-53
Repair information
Previous
Next
Go Back
Advertisement
Table of Contents
