Density Sensor Removal - Lexmark X925 7541-03 series Service Manual

Density sensor removal

1.
Remove the LVPS. See
2.
Remove the scanner power supply. See
3.
Remove the 7 screws securing the power box shield to the printer frame.
4.
Disconnect the density sensor harness from the density sensor.
5.
Remove the two screws (D) fastening the density sensor to the frame.
"Low volt power supply removal" on page
"Scanner power supply removal" on page
D
C
4-51.
4-58.
B
Repair information
7541-03x
Previous
Next
Go Back
4-57