Configuration Menu; Entering Config Menu - Lexmark X925 7541-03 series Service Manual

Configuration Menu

The Configuration menu contains a set of menus, settings, and operations which are infrequently used by a
user. Generally, the options made available in this menu are used to configure a printer for operation.
An asterisk (*) in the value list in the following menus indicates the default value.

Entering Config Menu

To enter the Configuration Menu:
1.
Turn off the printer.
2.
Press and hold 2 and 6.
3.
Turn on the printer.
4.
Hold the buttons until the splash screen appears.
The following are available from the Configuration Menu:
Configuration Menu
Reset Separator Roll and Pick Assembly
Counter
Reset Fuser Counter
Reset Maintenance Counter
Reset Transfer Belt Counter
USB Scan To Local
Black Only Mode
Print Quality Pages
Fuser Speed
Reports
Color Trapping
Tray Insert Message
SIZE SENSING
Panel Menus
PPDS Emulation
Download Emuls
Factory Defaults
Energy Conserve
Fax Low Power Support
Min Copy Memory
Num Pad Job Assist
Format Fax Storage
Fax Storage Location
See "Reset Separator Roll and Pick Assembly Counter"
on page 3-10.
See "Reset Fuser Counter" on page
See "Reset Maintenance Counter" on page 3-10
See "Reset Transfer Belt Counter" on page
See "USB Scan to Local" on page
See "Reset Maintenance Counter" on page 3-10
See "Print Quality Pages" on page 3-11
See "Fuser Speed" on page
See "Reports" on page 3-11
See "Color Trapping" on page 3-11
See "Tray Insert Message" on page
See "SIZE SENSING" on page 3-12
See "Panel Menus" on page 3-12
See "PPDS Emulation" on page 3-12
See "Download Emuls" on page 3-12
See "Factory Defaults" on page 3-12
See "Energy Conserve" on page 3-13
See "Fax Low Power Support" on page
See "Min Copy Memory" on page
See "NumPad Job Assist" on page
See "Format Fax Storage" on page
See "Fax Storage Location" on page
7541-03x
3-10.
3-11.
3-11.
3-11.
3-12.
3-13.
3-13.
3-13.
3-13.
3-13.
Diagnostic aids
Previous
Next
Go Back
3-9