Drive Unit Motor C/M/Y/K - Lexmark X925 7541-03 series Service Manual

12.
Remove the two screws (H) in the lower left corner.

Drive unit motor C/M/Y/K

Note: All four motors use this procedure.
1.
Remove the drive unit.
2.
Place the drive unit with the motors down on a table.
3.
Remove the two screws (A) securing the motor to the drive unit.
Note: Note: When replace the drive motor, be careful to not damage the gears in the drive unit with the
metal gear on the motor.
H
7541-03x
4-83
Repair information
Previous
Next
Go Back