Flatbed Scanner Cables Removal - Lexmark X925 7541-03 series Service Manual

7541-03x
5.
Remove the two screws (C) on the top rear of the cover.
6.
Remove the two screws (D) on the top rear of the cover.
7.
Lift the cover off of the flatbed chassis.

Flatbed scanner cables removal

1.
Remove RIP cover. see
2.
Disconnect the scanner FFC cable (A) from J3 on RIP card.
4-162
Service Manual
"RIP cover" on page 4-5.
Previous
Next
Go Back