Table of Contents
Advertisement
7541-03x
8.
Remove the screw (D), beneath the spur gear, securing the right side of the ADF main feeder to the top
flatbed cover.
9.
Remove the main feeder from the flatbed cover.
10.
Remove the solenoids.
11.
Remove the ADF clutch.
12.
Remove the Inner ADF top cover.
13.
Remove the ADF paper guide.
Note: After reinstalling the new component, perform the scanner calibrations. See
page
4-211.
4-136
Service Manual
"Adjustments" on
Previous
Next
Go Back
Advertisement
Table of Contents
