Chapter 3 - Installing Devices
Removing the Chassis Cover
1. Make sure that the system and all other peripheral devices connected to it have been
powered-off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the back side of the system are used to secure the cover to the
chassis. Remove these screws and then put them in a safe place for later use.
4. After removing the mounting screws, lift the cover up.
Lift the Cover Upward
Chapter 3 Installing Devices
Chapter 3
5. The SODIMM socket and the SATA drive bay are readily accessible after removing the chas-
Mounting Screw
Mounting Screw
11
sis cover.
SODIMM socket
Mounting Screw
SATA drive bay
www.dfi .com