DFI KS104-CD User Manual page 52

6. Click "Yes, I want to restart my
computer now" then click Finish.
Restarting the system will allow the
new software installation to take
effect.
Chapter 7 Supported Software
Chapter 7
F6 Floppy Configuration Utility
This is used to create a floppy driver diskette needed when you install Windows
XP using the F6 installation method. This will allow you to install the operating
system onto a hard drive when in AHCI mode.
1. Insert a blank floppy diskette.
2. Locate for the drivers in the CD then copy them to the floppy diskette. The
CD includes drivers for both 32-bit and 64-bit operating systems. The path to
the drivers are shown below.
32-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy32
64-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy64
52
®
www.dfi .com