DFI KS104-CD User Manual page 45

Boot
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security
Boot Confi guration
1
Setup Prompt Timeout
[On]
Bootup NumLock State
[Disabled]
Quiet Boot
07.69
CSM16 Module Version
[Force BIOS]
Option ROM Messages
[Postponed]
INT19 Trap Response
Boot Option Priorities
[SATA SM:WDC WD80...]
Boot Option #1
Hard Driver BBS Priorities
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on wherein the function of the numeric keypad is the
number keys. When set to Off, the function of the numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Option ROM Messages
Set display mode for option ROM.
INT19 Trap Response
BIOS reaction on Int19 trapping by option ROM.
Immediate
Execute the trap right away.
Postponed
Execute the trap during legacy boot.
Hard Driver BBS Priorities
Set the order of the legacy devices in this group.
Chapter 6 BIOS Setup
Chapter 6
Save & Exit
Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefi nite waiting.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Security
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced
Chipset Boot
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is only
asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will have
Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Administrator Password
User Password
HDD Security Confi guration
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Administrator Password
Sets the administrator password.
User Password
Sets the user password.
45
Security Save & Exit
Set Administrator
Password.
3

Select Screen
20

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
www.dfi .com