Removing Paper From The Auto Take-Up Reel Unit - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
After wrapping the paper around the core,
ensure that paper around the core is sufficiently
loose.
H
Set the Auto switch to Backward.
Removing Paper from the Auto
Take-up Reel Unit
This section describes how to remove paper from the
auto take-up reel unit.
!
Caution:

Removing paper from the auto take-up reel unit

requires two workers, one on each end of the roll.
A single worker working alone could drop the roll,
resulting in injury.
Basic Operations
Buttons that are used in the following settings
A
Set the Auto switch to Off.
B
Cut the paper and take it up until it is all on the
auto take-up reel unit roll core.
"Manual cut method" on page 33
U
After cutting the paper, support the end to
prevent the printed surface touching the floor;
continue to support the paper until it is all taken
up. Keep the Manual switch pressed in the
take-up direction (either Forward or Backward).
55