Menu Descriptions; Print Queues Menu - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Menu Descriptions

Print Queues menu

When the printer printed without using the printer driver included with the printer or the PS driver included with the
optional Adobe PostScript 3 Expansion Unit, the job names and estimated times in the following table may not be
displayed correctly.
*1. SC-T7200D Series/SC-T5200D Series only
*2. SC-T7200 Series/SC-T5200 Series/SC-T3200 Series only
*3. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected only
*4. When the optional Adobe PostScript 3 Expansion Unit has been connected only
Item
*3
XXXXXXXXXXX (name of
Print Queue
waiting print job)
*2, *3 View Hold
Held Queue
Queue
Resume All Jobs
Using the Control Panel Menu
Description
Waiting Job Name
User
Estimated Start
Time
Estimated Print
Time
Printing
Availability
XXXXXXXX Paused Job Name
XXX (name
User
of held job)
Paper Type
Source
Size
Reason For Hold
Press the Z button to resume all held jobs currently in the queue.
139
Lists the estimated start time and time needed to
print the selected job.
It also predicts whether the job can be completed
without replacing paper, ink or the Maintenance
Box. The estimates are guidelines only. We
recommend proceeding even if Can Not Complete
is displayed.
Remote Manager and the LFP HDD Utility display
the reason for the Can Not Complete message and
allow you to hold or cancel the job.
"Function Summary" on page 67
U
Printing availability by paper remaining cannot be
performed correctly if Roll Paper Remaining is
Off.
The printer will not predict availability on the basis
of the amount of ink remaining when documents
are printed using LFP Print Plug-In for Office or
EPSON CopyFactory5.
When the printer printed using the PS driver
included with the optional Adobe PostScript 3
Expansion Unit, Estimated Start Time and
Estimated Print Time are displayed as "0
minutes".
This option is available only if On is selected for
Store Held Job in the Setup menu,
Displays the print settings for held jobs and the
reason the job is held.
Jobs that are held because the job print settings
differ from those currently selected for the printer
can be printed as described below.
(1) Replace the paper and take whatever other
steps may be necessary to ready the device for
printing.
(2) Select Resume All Jobs.