Setup Menu - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Setup menu

Selecting Administrator Menu displays a password prompt. No password is entered at shipment; press the Z button
to proceed. If the administrator password has been changed, enter the administrator password.
*1. SC-T7200D Series/SC-T5200D Series only
*2. SC-T7200 Series/SC-T5200 Series/SC-T3200 Series only
*3. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected only
*4. When the optional Adobe PostScript 3 Expansion Unit has been connected only
* Default setting
Printer Setup
Roll Paper Setup
Item
Auto Cut
Cutting Mode
Refresh Margin
Page Line
Roll Paper Margin
Using the Control Panel Menu
Description
*
Choose On to automatically cut roll paper using the built-in cutter
On
as each page is printed or Off to disable auto paper cutting. The
setting selected with the printer driver takes priority when the
Off
printer driver is used.
* If you want to reduce operation noise during cutting, set Silent. If
Normal
Silent is set, the cutting speed is reduced.
Silent
*
If On is selected during borderless printing, the printer will
On
automatically trim the leading edge to remove any ink stains that
may have been left by the previous copy; to disable this feature,
Off
choose Off.
* If Auto Cut is Off, you can choose to print (On) or not print (Off) cut
On
lines on roll paper. Cut lines are not printed if Auto Cut is On or
when cut sheets or poster board is used.
Off
Note, however, that if the roll width selected with the computer is
narrower than the paper loaded in the printer, cut lines will be
printed regardless of the option selected for Auto Cut.
The setting selected with the printer driver takes priority when the
printer driver is used.
* When set to Normal, the top and bottom margins are 15 mm, and
Normal
the left and right margins are 3 mm.
Top15mm/
Except for 15mm, the left and right margins for all other settings
Bottom15mm
are 3 mm.
"Printable area" on page 63
Top35mm/
U
Bottom15mm
Top45mm/
Bottom15mm
3 mm
15 mm
146