Borderless Printing; Types Of Borderless Printing Methods; Supported Media Sizes For Borderless Printing - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Borderless Printing

You can print your data without margins on the paper.
The types of borderless printing you can choose vary as
shown below depending on the media type.
Roll Paper: No margins for all edges, no margins for the
left and right
Cut Sheets: No margins for the left and right only
(Borderless printing is not available with poster board.)
When printing borderless for all edges, you can also
configure the cutting operation. U
Cutting" on page 98
When performing left and right borderless printing,
margins appear on the top and bottom of the paper.
Top and bottom margin values U
page 63
Types of Borderless Printing
Methods
You can perform borderless printing using the
following two methods.
❏ Auto Expand
The printer driver enlarges the print data to a size
slightly larger than the paper size and prints the
enlarged image. The sections which are beyond the
paper edges are not printed; therefore, resulting in
borderless printing.
Use settings such as Page Setup in the applications
to set the size of the image data as follows.
- Match the paper size and page setting for the print
data.
- If the application has margin settings, set the
margins to 0 mm.
- Make the image data as large as the paper size.
More Ways to Print
❏ Retain Size
"About Roll Paper
"Printable area" on
Supported Media Sizes for
Borderless Printing
The following media sizes are supported for borderless
printing.
The sizes supported vary with the printer model.
96
Create the print data larger than the paper size in
the applications to produce borderless output. The
printer driver does not enlarge the image data. Use
settings such as Page Setup in the applications to set
the size of the image data as follows.
- Create print data larger than its actual print size by 3
mm on the left and right (6 mm in total).
- If the application has margin settings, set the
margins to 0 mm.
- Make the image data as large as the paper size.
Select this setting if you want to avoid image
enlargement by the printer driver.
Supported SC-T7200
paper Series/
widths SC-T7200
D Series
✓
10 inch
✓
30 cm
✓
Super A3/
329 mm/
13 inch
SC-T5200 SC-T3200
Series/ Series
SC-T5200
D Series
✓ ✓
✓ ✓
✓ ✓