Epson Stylus Scan 2000 Product Support Bulletin

EPSON
P
Date: 4/1/2002
PSB #: PSB.2002.04.001
Reference: N/A
Product(s): Stylus Scan 2000/2500
Subject: Product Installation on Windows XP
This bulletin was created to provide installation instructions for the Stylus Scan 2000/2500 products on
Windows XP.
Issue:
Windows XP provides built-in scanner and printer driver support for these products. The drivers
provide scanning capability via Microsoft's WIA (Windows Image Acquisition) user interface and
printing capability via Windows XP-compatible applications. As soon as you connect your Stylus Scan
product to the computer, Windows automatically detects the device and installs the drivers. However,
these drivers won't work with Epson's Smart Panel. In order to scan and print from Smart Panel, you
must install Epson drivers. Although Epson does not provide XP drivers for the Stylus Scan products,
you can use the Windows 2000 drivers. The next section provides instructions on how to install and
configure your Stylus Scan product on Windows XP.
Resolution:
If you have the Stylus Scan 2000, you will need to order the Epson Stylus Scan Drivers for Windows
2000 CD. The product code is CPD-10857. Call Epson's Technical Support to order a copy. If you
have the Stylus Scan 2500/2500Pro, you will need the updated Printing and Scanning Software CD.
The product code for this CD is CPD-9146R1. Look for this code on the CD that came with your
product. The code is imprinted on the label. If the code says CPD-9146, you need to call Epson's
Technical Support to order the newer CD.
Note: Smart Panel is not available as a downloadable file from our Web site. Therefore, do not
download the Stylus Scan Windows 2000 drivers. In order for Smart Panel to work, it must be installed
at the same time as the drivers. You must use the setup installer on the CD for installing Smart Panel
and the drivers.
Steps:
Important:
Before you start, you must have sufficient access rights to install/uninstall and use the
Epson drivers and Smart Panel software. Therefore, when you start up Windows XP, always log in as
administrator or as a user with administrator rights.
1) Depending on the product you have, insert either the Stylus Scan Windows 2000 or Printing and
Scanning Software CD into the CD ROM drive.
2) Attach your Stylus Scan product to your computer with a USB cable and turn it on. Do not use a
parallel connection. If this is the first time that you are connecting the Stylus Scan to your computer,
Windows XP will detect the device, install drivers and automatically configure the port. This only takes
a few moments; so, do not interrupt the process. Once completed, go to the next step.
S
RODUCT UPPORT
B
ULLETIN
Originator: JD
Authorization:
Total Pages: 3
1