Epson SC-T7200 Series User Manual page 100

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
D
When roll paper is used, Auto Cut options are
available in the Advanced tab Roll Paper Option
area.
"About Roll Paper Cutting" on page 98
U
E
Check other settings, and then start printing.
Making Settings for Mac OS X
A
Open the Print screen and select the paper size
from the Paper Size option, and then select a
borderless printing method.
"Basic Printing Methods(Mac OS X)" on
U
page 60
The selections for borderless printing methods
are displayed as shown below.
XXXX (Roll Paper - Borderless (Auto Expand))
XXXX (Roll Paper - Borderless (Retain Size))
XXXX (Sheet - Borderless (Auto Expand))
XXXX (Sheet - Borderless (Retain Size))
Where XXXX is the actual paper size, such as A4.
Note:
If page setting options are not available in the
application's print dialog, display the page settings
dialog.
B
If Auto Expand is selected for paper size, select
Page Layout Settings from the list and click
Expansion.
The following section shows how much the
image will be larger than the paper edges.
More Ways to Print
Max
Standard
Min
Note:
Moving the slider towards Min decreases the image
enlargement ratio. Therefore, some margins may
appear at the edges of the paper depending on the
paper and printing environment.
C
When using roll paper, select Advanced from the
list and choose an Auto Cut option.
"About Roll Paper Cutting" on page 98
U
D
Check other settings, and then start printing.
100
: 3 mm for left and 5 mm for right
(the image shifts 1 mm to the
right)
: 3 mm for left and right
: 1.5 mm for left and right