Viewing And Changing Media Settings - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Viewing and Changing
Media Settings
After the paper is loaded, the control panel screen shows
the media type currently selected with the printer.
Note:
If On is selected for Roll Paper Remaining and roll paper
with a barcode for roll data is loaded, the printer will read
the barcode and adjust settings automatically.
Follow the steps below to change the settings displayed.
If you are using the SC-T7200D Series/SC-T5200D
Series, settings are retained for each loaded roll paper
(Roll 1/Roll 2).
Buttons that are used in the following settings
A
Use the d/u buttons to select Change Settings
and press the Z button.
If you will print with the displayed media type,
select Keep Settings Above, and press the Z
button. Next, proceed to Step 5.
Imformation
Selected Paper Type :
Plain Paper
Keep Settings Above
Change Settings
Proceed
B
Select the media type, and then press the Z
button.
Basic Operations
C
Select the media name, and then press the Z
button.
D
If On is selected for Roll Paper Remaining, you
will be prompted to enter the length of the roll.
Press the d/u buttons to choose a value between
5.0 and 150 m and press the Z button. You can
set in 0.5 m increments.
If you press the r button, you can change Roll
Paper Remaining to Off.
To change the setting back to On, use Roll Paper
Remaining in the Paper menu.
"Paper menu" on page 141
U
The printer will display Ready after a brief pause,
showing that it is ready to print. Send the data to be
printed from the computer.
Roll Paper Remaining
When On is selected for Roll Paper Remaining, the
printer tracks the following roll paper data.
❏ Time until replacement
The following settings are recorded in a barcode
printed on the roll.
The amount of paper remaining, the value selected
for remaining alert, and the paper type.
The barcode is automatically printed at the end of
the roll when the roll is rewound. The barcode is
automatically read and settings adjusted the next
time the paper is used, improving efficiency when
multiple rolls of paper are used.
❏ Tracking the amount of paper remaining in the .
tab info display area
The info display area shows the amount of paper
remaining in the current roll. Once the amount of
paper remaining falls below the limit, the amount is
replaced by a warning indicator showing that paper
is running low.
"Screen View" on page 15
U
43