Paper Menu - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Paper menu

If you use the Custom Paper Setting to register print settings for commercial paper on the SC-T7200D Series/
SC-T5200D Series, observe the following precautions.
If you are printing on both the Roll 1 and Roll 2, configure them individually, even when the paper is the same. If the
Custom Paper Setting set by the conditions set in Roll 1 is applied to the same type of paper loaded in Roll 2, but the
paper path, paper width, or other print conditions are different, printing will not be performed correctly.
*1. SC-T7200D Series/SC-T5200D Series only
*2. SC-T7200 Series/SC-T5200 Series/SC-T3200 Series only
*3. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected only
*4. When the optional Adobe PostScript 3 Expansion Unit has been connected only
* Default setting
Item
Load/Remove Paper
Select Plain Paper
Paper Type
Photo Paper
Matte Paper
Others
Custom Paper
Using the Control Panel Menu
Description
Remove Paper
*2
Roll Paper
*1
Roll 1
*1
Roll 2
Cut Sheet (up to 0.8
mm thick)
Poster Board
Select the type of paper loaded.
Select the name of the custom paper loaded in the printer.
141
Instructions are not displayed if no paper is loaded.
Highlight the paper to be loaded and press the Z
button. Follow the on-screen instructions to load
the paper.
If paper is already loaded in the printer, the
instructions for removing the loaded paper type
will be displayed before loading instructions are
shown.