Printer Status; Network Setup - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Printer Status

Item
Firmware Version
Option Status
Show Total Prints
Print Status Sheet

Network Setup

Item
IP Address Setting
IPv6 Setting
IPsec Setting
PSK Setting
IEEE802.1x Setting
HTTPS Redirect Setting
Print Status Sheet
Restore Settings
Using the Control Panel Menu
Description
xxxxxxx,x.xx,xxxx
Lists the optional accessories currently connected to the printer and available for use.
2
XXXXXX m
Press the Z button to print a list of current printer settings.
Choose this option to view settings at a glance.
Description
*
Auto
Panel
Enable
*
Disable
Enable
*
Disable
Enter a Pre-Shared Key of up to 20 characters (half-width alphanumeric characters and symbols).
Enable
*
Disable
Enable
*
Disable
Press the Z button to print a list of the Network Setup. Use this information for a complete
overview of network settings.
Yes
No
You can see the firmware version.
When an optional auto take-up reel unit is connected, its firmware
version is displayed below the firmware version of the printer.
Furthermore, when an optional Adobe PostScript 3 Expansion
Unit is connected, its two control versions are displayed at the end.
Displays the total area of media printed (to a maximum of six
digits).
Select whether to use DHCP to set the IP address (Auto), or to set
the address manually (Panel). Choose Panel to enter the IP
address, Subnet Mask, and Default Gateway. Contact your
system administrator for detailed information.
Select whether to enable or disable the IPv6 function.
Select whether to enable or disable the IPsec function.
Select whether to enable or disable the IEEE802.1X function.
Select whether to enable or disable the function to auto-direct
HTTP to HTTPS.
Select Yes to restore all Network Setup content to default values.
158