Epson SC-T7200 Series User Manual page 160

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Item
Power Cleaning
*3 Format Hard Disk
Manage HDD
Printer Mode
Auto
PostScript
HP-GL/2
Date And Time
Time Zone
*4
Reset PS Settings
Reset All Settings
Using the Control Panel Menu
Description
Inspect the printed pattern and select the check boxes for patterns with faint or
missing areas. To select all nozzles, place a check in the box on the left.
Yes
No
* Normally, leave the setting at Auto. Sent print data is identified, and the operation
mode is switched automatically. If operation mode switching is not performed
correctly, and printing is not performed correctly, set to the operation mode to be
*4
used.
MM/DD/YY HH:MM
Enter the difference between the current time zone and GMT.
The selected time zone is used in e-mail notifications sent by Remote Manager
when an error occurs and so on.
Yes
No
Yes
No
If Yes is selected, an optional hard disk unit or
Adobe PostScript 3 Expansion Unit that is
connected to the printer is formatted.
Formatting the hard disk unit or Adobe PostScript
3 Expansion Unit deletes all stored print jobs.
Hard disk units or Adobe PostScript 3 Expansion
Units that have been used with other printers must
be formatted before they can be used with this
printer.
Set the printer's built-in clock. The time provided
by the clock is used when printing logs and status
sheets.
Select Yes to initialize the user font and user ICC
profile saved in the user area of the Adobe
PostScript 3 Expansion Unit. Initialization deletes
saved data.
Select Yes to restore defaults for all settings except
the Date And Time, Language, and Unit: Length
options in the Setup menu.
160