Epson SC-T7200 Series User Manual page 148

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Item
Roll Switch Paper Type
*1
Condition
Paper
Length
Paper
Width
Print Job
Priority
Using the Control Panel Menu
Description
*
Type Match
Disable
*
Print Length
Remaining
Amount
Disable
*
Best Fit
Width Match
Disable
Roll In Use
*3
*
In Order
From the following options, select the condition under which to
switch to another roll for printing when the current roll has run
out.
❏
Type Match: Switch to the other roll for printing only when
the paper type specified in the job and the paper type of the
other roll are the same.
If a different type of paper has been loaded on the other roll,
an error appears, and the printer cannot print.
❏
Disable: Print even when the paper type is different.
From the following options, select the conditions when you want
to switch in consideration of roll paper remaining and print length
(length of one page of a print job).
Note that if Roll Paper Remaining is Off in the Paper menu, this
setting is disabled regardless of its configuration.
❏
Print Length: If both Roll 1 and Roll 2 have enough paper
remaining for the print length, print using the roll with the
lower remaining amount. If the remaining amount of one roll
is shorter than the print length, print using the other roll.
❏
Remaining Amount: Print using the roll with the lower
remaining amount regardless of the print length.
❏
Disable: Print using the roll currently in use regardless of the
remaining amount or print length.
From the following options, select the conditions when you want
to use the roll paper that reduces print margins in consideration of
roll paper width and print job length (the value of Document Size
of the printer driver).
❏
Best Fit: Compare the roll width of Roll 1 and Roll 2 and the
width of the print job, and then print using the roll with the
smaller print margin.
❏
Width Match: Print using the roll with a width that matches
the width of the print job.
❏
Disable: Print using the roll currently in use regardless of the
roll paper width or print job width.
Select the print job priority when there are several waiting jobs:
print jobs that can be printed by the roll currently in use, switch to
another roll, and then print the remaining jobs (Roll In Use) / Print
jobs in the order they were received (In Order). When the setting is
In Order, automatic roll switching operations may be frequent
depending on the settings of the print jobs, and this may increase
the overall print time.
148