Others - Epson SC-T7200 Series User Manual

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
!
Caution:
If you opened the printer cover in operation, do not
touch the area as indicated by the warning labels.
High temperatures may cause burns.
A
Turn off the printer.
B
Turn the printer on.
After a pause, the message Open printer cover
then tear off and remove jammed portion. will
appear in the display.
C
Open the printer cover and move the print head
away from the jam.
c
Important:
Other than when you are removing paper
jams, do not touch the print head. If you touch
the print head with your hand, static
electricity may cause a malfunction.
D
Cut the top portion of any torn or crinkled areas
using a commercially available cutter.
E
After removing the any torn or crinkled area,
press the Z button and close the printer cover.
F
Remove the cut paper.
Problem Solver
G
After removing the paper, press the Z button.
Reload the paper and resume printing.
"Loading and Removing Cut Sheets" on
U
page 37

Others

The control panel display keeps
turning off.
Is the printer in sleep mode?
o
Sleep mode is exited if a print job is received or the P
button on the control panel is pressed. The delay
before the printer enters sleep mode can be selected
in the Setup menu.
"Setup menu" on page 146
U
Color ink runs out quickly even when
printing in the Black&White mode or
when printing black data.
Color ink is consumed during the head
o
cleaning process.
If all nozzles are selected when you perform Head
Cleaning or Power Cleaning, inks of all colors will be
used. (This is true even if you are currently printing in
black and white.)
"Cleaning the print head" on page 166
U
The paper is not cut cleanly.
Replace the cutter.
o
If the paper is not cut cleanly, replace the cutter.
"Replacing the Cutter" on page 172
U
A light is visible inside the printer.
This is not a failure.
o
The light is a light inside the printer.
The administrator password has been
lost
Should you forget the administrator password,
o
contact your dealer or Epson Support.
190