Bed Conversion - Winnebago Journey Manual

SECTION 9 –
FURNITURE AND SOFTGOODS
• Press to
• Press to
return upright
Rest Power Easy Switch
• Press the switch toward the inboard
side of the lounge to recline.
• Press the switch toward the
outboard side of the lounge to
return upright.
To Extend Footrest
• Squeeze the release latch (located behind the
front panel opening) and pull footrest trundle
out until it locks in the fully extended position.
• Lift footrest up and away from lounge to
raised position.
NOTE: The gap between the footrest and seat
should provide ample room to enter and
exit the lounge. If you wish, however, you
may unlatch the footrest and push it
against the lounge seat.
9-12
recline
The footrest will lock when in the fully
extended position. You must squeeze the
release latch to retract the footrest.
Tip for "Power Users"
• If you have the footrest unlatched and
positioned against the seat cushion, it will
move out with the lounge when you press the
Rest Easy Power switch in the recline
position.
• When you return to the upright position, you
can hook your heels over the front edge of the
footrest and pull it back with you.
• When you want to get up, simply push the
footrest section forward with your feet to
provide a gap for you to exit.

Bed Conversion

• Extend footrest and push together with the
lounge seat cushion.
• Press Rest Easy Power switch in the recline
position until entire lounge lies flat.
• Reverse steps to return to lounge seating.