Winnebago Journey Basic Operation Manual

BLU-RAY PLAYER AND
™
SOUND BAR SYSTEM
–If Equipped
™
The Blu-ray Player and Sound Bar
System operates from 120-volt AC
household current only, so you must have
either the shoreline connected, the generator
running, or the inverter turned on (if
equipped). The TV is connected to the
Sound Bar and Blu-ray player.
To Watch a Blu-ray:
1. Turn "ON" the TV, HDMI Video
Selection System, Sound Bar, and Blu-
ray player.
2. Determine which TV you want to use
(e.g. "Lounge" for lounge TV) and
select Source (1) for Blu-ray.
3. Set TV Input to HDMI1 by using the TV
remote or the controls on the TV.
4. Set Sound Bar Source to Optical input
by using the Sound Bar remote.
5. Insert Blu-ray into the player. Blu-ray
will begin to load automatically.
6. The Blu-ray may load directly
to the main title/menu screen or
it may begin to play previews. You may
be able to skip previews if desired by
pressing the chapter "skip" button on the
Blu-ray player remote until you see the
main menu screen.
7. When the main menu screen appears,
use the arrow buttons on the Blu-ray
player remote to select the desired entry
or press the "Enter" button on the Blu-
ray player remote to begin playing the
feature.
TV Sound through the Sound Bar
(Lounge TV Only)
When watching TV programs
(broadcast, cable, or satellite), the TV
normally plays sound through its own built-
in stereo speakers. To connect TV sound
output to the Sound Bar for a richer sound
quality, follow these steps:
• Turn "ON" the TV and Sound Bar.
• Select the TV channel you wish to
watch.
• Press the OPTICAL button on the Sound
Bar remote until audio is heard.
• Turn TV and/or Sound Bar volume up or
down.
Turning TV Speakers On/Off
• Press "Settings" button on remote.
• Select "Audio" option.
• Select "Sound Out", then select "LG
Sound Sync (optical)".
Listen to Music stored on a
Bluetooth device
• Press the "Bluetooth" button on the front
panel of the Sound Bar or Bluetooth
button on Sound Bar remote to set Sound
Bar to Bluetooth mode.
• On your Bluetooth device, perform the
pairing operation. A list of devices
found will appear on your device. Select
"LG Sound Bar".
• Enter the PIN code (if required).
• When the devices are paired, the Sound
Bar Bluetooth LED will turn on for a few
seconds and turn off.
• Turn the Sound Bar volume up or down.
Further Information
See the manufacturer's user guide
provided in your InfoCase for complete
feature descriptions and operating
instructions.