Sleeping Facilities; Dinette/Bed Conversion - Winnebago suncruiser Owner's Manual

SECTION 9
FURNITURE & SOFTGOODS
• Push dinette chairs against opposite sides
of table.
• Bind chair legs and table pedestal together
for travel with strap(s) provided.
• If table is 'legless' type, bind both front
chair legs together.
(Typical chair leg fastening method shown– your
coach may vary)
Pedestal Table
–If Equipped
The pedestal base of the dining table is
fastened to the floor with a clamp as shown.
You can unscrew the knob and remove the
clamp to position the table wherever you desire in
the living area of the coach while the coach is
parked.
NOTE: Store the clamp assembly for future use
to secure the table before traveling.
9-2
WARNING
Be sure all free-standing chairs and
furniture items, and all other loose items
are secured or stored properly while the
vehicle is in motion. Possible overlooked
items such as canned goods or small
appliances on the countertop, cooking
pans on the range can also become
dangerous projectiles during a sudden
stop.

SLEEPING FACILITIES

WARNING
Do not use sleeping facilities while vehicle
is moving.

DINETTE/BED CONVERSION

(Typical view – Your coach may vary)
–If Equipped
Dinette to Bed:
1. Lift the seats and remove the seat support
'bumpers' to allow the seats to lie flush for use
as a bed. Do not lose the bumpers because you
must refit them when reverting back to dinette
seat configuration.