Mounting The Extension - WAGNER PEM-C2 Operating Manual

5.

Mounting the extension

Always select a spraygun which has been thoroughly cleaned when mounting a
round spray nozzle extension.
A better alternative is to only selected a new spraygun in such cases.
Caution
3
2
1
6
5
5
1
6
02/01
PEM-C2
4
•
•
•
7
3
4
Pull off deflector cone 1 from nozzle insert 3.
Unscrew the outer nut 2 (standard) from the gun
housing 4 and put aside.
The outer nut is not necessary for the extension.
Carefully draw the nozzle insert 3 out of the gun
housing 4.
•
Unscrew the outer nut 5 from the
extension 6.
•
Slide the extension 6 into the gun
housing 4 and tighten it up with the
outer nut 7.
•
Carefully re-fit the nozzle insert 3 in
the extension 6 and tighten it up with
the outer nut 5.
•
Slide the deflector cone 1 on to the
nozzle insert 3.
17
0351801