Additional Items Required; Instruction Manual - Seagull Models Extra 300 Assembly Manual

Table of Contents

EXTRA 300.

INTRODUCTION.

Thank you for choosing the EP EXTRA 300 ARTF by SEAGULL EP. The EP EXTRA 300 was

designed with the intermediate/advanced sport flyer in mind. It is a semi scale airplane which is

easy to fly and quick to assemble. The airframe is conventionally built using balsa, plywood to make

it stronger than the average ARTF , yet the design allows the aeroplane to be kept light. You will find

that most of the work has been done for you already.Flying the EP EXTRA 300 is simply a joy.

This instruction manual is designed to help you build a great flying aeroplane. Please read this

manual thoroughly before starting assembly of your EP EXTRA 300. Use the parts listing below to

identify all parts.

WARNING.

Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is

capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU

ASSUME ALL RISK & RESPONSIBILITY.

If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C

supplier and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training

procedures designed to help the new pilot on his way to successful R/C flight. They will also be able

to advise on any insurance and safety regulations that may apply.

ADDITIONAL ITEMS REQUIRED.

Motor:Park 450 to Park 480

Outrunner.

Park 480 outrunner 910KV (EFLM1510)

Speed control: 35A to 40 A

brushless.

40-Amp Brushless ESC (EFLA312B).

Battery: 3 cell 11.1 V / 1320 -

2100mAh Li-Po.

-3Cell.11.1V1320mAh Li-po ( THP1320SPL)

-3Cell, 11.1V1900mAh Li-po (THP19003S).

-3Cell,11.1V2100mAh Li-po(THP21003SPL)

Computer radio with four sub-

micro servos ( S75 7.5gram (

EFLRS75)) .

Propeller 10x4.7 electric.

Table of Contents