Seagull Models Extra 300 Assembly Manual page 9

Using a small weight (
) and thread, feed the string through
works well
the wing as indicated.
Attach the string to the servo lead and
carefully thread it though the wing. Once you
have thread the lead throught the wing, remove
the string so it can use for the other servo
lead. Tape the servo lead to the wing to prevent
it from falling back into the wing.
Secure the servos with the screws pro-
vided with your radio system.
Attach the micro control connector to the
servo arms. Be sure to use the lock tie but it
could free rotation .
www.seagullmodels.com
Weighted fuel pick-up
Wing bottom.
!4) Using a ruler & pen to draw a straight
line as pictures below
Straigh line.
!5) Insert aileron control horn to the aileron.
M2x12mm.
Aileron control horn.
Pen.
9