Memory Viewer; Set Slide; Slide Transition Effect; Sort Order - Eiki EK-308U Owner's Manual

The Memory Viewer function makes it possible to project the pictures which are stored in the USB
memory when the USB memory is inserted into the projector
1 Press MEMORY VIEWER button on the remote control.
2 Press MENU button on the remote control to display screen menu. Press  button to select
"Memory Viewer", then press the OK button.
3 Press  button to select the item you want to set, press the OK button.
4 Press  button to adjust the item, then press the OK button.

Set Slide

Start the slide show.

Slide transition effect

Set the slide transition effect when the slide show
image is switching. Press ▲▼ to select "Apply" and
press the OK button to execute the setting.
Slide down ... Switch the image from the top to the
bottom.
Slide right .... . Switch the image from the left to the right.

Sort Order

Set the sort order of the slide show. Press ▲▼ to
select "Apply" and press the OK button to execute
the setting.
Extend Order ...... Sort files or folders in extended
order.
Size Order .......... Sort files or folders in amount of
data order.
Time Order ......... Sort files or folders in stored time
order.
Name Order ....... Sort files or folders in name order.

Rotate

Set the rotate direction of image. Press ▲▼ to select
"Apply" and press the OK button to execute the
setting.
No Rotate ........... Rotate is disabled.
270 Degrees ...... Rotate 270 degrees in anti-
clockwise direction.
180 Degrees ...... Rotate 180 degrees.
90 Degrees ........ Rotate 90 degrees in anti-
clockwise direction.

Best Fit

Set the image whether or not to fit with the projected
screen. Press ▲▼ to select "Apply" and press the OK
button to execute the setting.
On ...... Display the image to fit with the aspect of the
projected screen.
Off ...... Display in the normal pixels of the image.
52

Memory viewer

Memory Viewer menu
 Note:
● The "Memory Viewer" menu is available when select
the input source as "Memory Viewer".
● All the setting except "Set Slide" will effective after
execute "Apply".
● See page 62 for Memory viewer function.

Repeat

Enable or disable repeat funtion of the slide show.
Press ▲▼ to select "Apply" and press the OK button
to execute the setting.
On ...... Display all of the files repeatedly.
Off ...... Return to the thumbnail page after the last file
is broadcasted.

Apply

Execute the setting in slide show.
Press  to select "Apply", then press the OK
button, the setting of the items except the "Set Slide"
will be effective.
Memory
Viewer
Set slide
Slide transition effect
Sort order
Rotate
Best fit
Repeat
Apply
Slide right
Name order
No rotate
Off
Off