Installing The Internal Fixed Hard Drives - Supermicro SuperServer 5029C-TN2 User Manual

Installing the Internal Fixed Hard Drives

The SC721TQ-250B chassis supports two internal 2.5" SATA fixed hard drives: one top-
mounted drive and one side-mounted drive.
Installing a Top-Mounted Fixed Hard Drive
1. Power down the system as described in Section 2.1 and remove the chassis cover.
2. Place a 2.5" hard drive into the hard drive bracket and secure the drive to the bracket
with the four screws provided.
3. Place the hard drive and bracket into the top mounting position of the chassis as
illustrated below and secure it to the chassis with two screws.
4. Replace the chassis cover, plug the power cord into the rear of the power supply and
power up the system.
Figure 2-12. Installing a Top-Mounted Fixed Hard Drive
Chapter 2 Maintenance and Component Installation
25