Table of Contents
Advertisement
Installing the Internal Fixed Drives
The CSE-721TQ-350B2 chassis supports two internal 2.5" fixed drives (one top-mounted
drive and one side-mounted drive) and one DVD-ROM drive.
Installing a Top-Mounted Fixed Drive
1. Power down the system as described in Section 2.1 and remove the chassis cover.
2. Place a 2.5" drive into the drive bracket and secure the drive to the bracket with the four
screws provided.
3. Place the drive and bracket into the top mounting position of the chassis as illustrated
below and secure it to the chassis with two screws.
4. Replace the chassis cover, plug the power cord into the rear of the power supply and
power up the system.
Figure 2-12. Installing a Top-Mounted Fixed Drive
Chapter 2: Maintenance and Component Installation
29
Advertisement
Table of Contents
Troubleshooting
