Operation - ADJ WiFly NE1 User Instructions

WiFly NE1
LOADING FIXTURE PROFILES
NOTE: The WiFly NE1 comes pre-loaded with Generic fixture
profiles, which include RGB, RGBW, RGBA, RGBWA, RGB-
WAU, TRI-WHITE, 36CH 8-Bit ML (M1), and 36CH 16-Bit ML
(M2). See the Generic fixture traits chart section on page 18 for
channel details. All other profiles can be loaded from the USB
stick, which is included. The USB stick includes several ADJ
profiles, which are compatible with this controller. Because the
file names are abbreviated, due to character limitations, please
us the "Fixture Profile Details" PDF list to cross reference the
files. So your controller runs at optimum speed, please only
load the profiles that you will be using. A maximum of 65 pro-
files can be loaded at a time.
1. With the controllers power switch OFF, insert the included
USB drive into the controllers USB port and power ON the con-
troller.
2. Press and hold down the SET-UP button for two seconds to
enter the main menu.
3. Select menu option 1 (Load Light Lib) by pressing the DIAL/
ENTER dial then turn the DIAL/ENTER dial to find the profile
that you wish to load.
4. Once you have located the profile, press the DIAL/ENTER
dial to load it. The display will momentarily read "Operation
Complete". Repeat steps 3 and 4 to load additional profiles or
press the ESC/PAGE button to exit.
Delete Light Lib
1. Press and hold the SET-UP button for two seconds to enter
the main menu.
2. Turn the DIAL/ENTER dial to menu option 2 (Delete Light
Lib). Press the DIAL/ENTER dial to enter.
3. Turn the DIAL/ENTER dial to find the profile that you wish to
ADJ Products, LLC www.adj.com - WiFly NE1

Operation

WiFly NE1
delete or select "delete all lib" to delete all profiles. Press the
DIAL/ENTER dial to enter.
4. Turn the DIAL/ENTER dial to select "Yes". Press the DIAL/
ENTER dial to enter. Press the ESC/PAGE button to exit.
Patch Light Lib
1. Press and hold the SET-UP button for two seconds to enter
the main menu.
2. Turn the DIAL/ENTER dial to menu option 3 (Patch Light Lib).
Press the DIAL/ENTER dial to enter.
3. Turn the DIAL/ENTER dial to find the profile that you wish to
patch. Press the DIAL/ENTER dial to enter.
4. Press the fixture button(s), 1-12, that you wish to patch the
selected profile to and turn the DIAL/ENTER dial to set the
starting address. Press the DIAL/ENTER dial to enter. Press the
ESC/PAGE button to exit.
Delete Patch Light
1. Press and hold the SET-UP button for two seconds to enter
the main menu.
2. Turn the DIAL/ENTER dial to menu option 4 (Delete Light
Patch) then select the fixture(s), 1-12, that you wish to delete
from the patch. Press the DIAL/ENTER dial to excute.
3. Turn the DIAL/ENTER dial to select "Yes". Press the DIAL/
ENTER dial to excute.
Edit Light Lib
Note: WiFly NE1 allows for channel defaults to be set for PAN,
TILT, COLOR, and GOBO channels when the profile is being
created. If you wish to edit these defaults or set automatic de-
faults for other channels, this is where you do this.
1. Press the SET-UP button for two seconds to enter the main
Page 10 ADJ Products, LLC www.adj.com - WiFly NE1
Operation
Page 11