Page 1
WiFly QA5 IP Specifications Model: WiFly QA5 IP Voltage: 100V ~ 240V/50~60Hz LEDs: 5 x 5W Quad LEDs (RGBA 4-in-1) IP Rating: Beam Angle: 40 Degrees Working Position: Any safe working position Power Draw: WiFly QA5 IP Power Cord Daisy Chain: 15 Fixtures Max.
Page 2
Product names used in this document may be trademarks or product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or registered trademarks of their respective companies and are service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States.
Page 3
(i.e. smoke, fog residue, dust, dew). ADJ Products, LLC. PLEASE recycle the shipping carton when ever possible. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 25 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 2...
Dim m er Dim m er The WiFly QA5 IP carries a 2 year (730 Days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight...
Page 5
CAUTION: This unit like any wireless device is highly susceptible to static electricity. Static electricity can severly damage the unit. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 23 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 4...
IP has 8 DMX channel modes, please see pages 9-10 for the different speed. modes. The DMX address is set on the back panel of the WiFly QA5 IP. When Channel 7 is between the values of 205-255, Channel 8 is in Your unit and your DMX controller require a standard 3-pin XLR connec- Auto Run Mode, and Channel 9 will control the auto run speed.
Not Used Do Not Use 115 - 142 5200K Not Used Do Not Use ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 21 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 6...
144 - 159 COLOR CHANGE 10 the UP and DOWN buttons to adjust intensity. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 7 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 20...
SET UP button to return to your selected Auto Fade Mode. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 19 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 8...
This function also allows you to use your fixtures as spot lights. The 192 - 207 COLOR FADE 13 WiFly QA5 IP has 5 DMX modes: 4 Channel mode, 5 Channel mode, 208 - 223 COLOR FADE 14 6 Channel mode, 10 Channel mode, and a 11 Channel mode. See...
COLOR CHANGE 10 This function is used to turn the WiFly function on and off. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 17 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 10...
Page 12
Dimmer Curve Diagram Chart on page 24 to see the settings and their respective beginning and ending fade times. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 11 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 16...
Page 13
They must be the same fixtures. DO NOT mix fixtures. ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 15 ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 12...
Color mode and Slave mode. Each press of this button will switch be- NOTE: The ADJ RFC control must be set to OFF on all the units to use tween the two modes. When in Static Color mode, use the “+” or “-” to this function.
Need help?
Do you have a question about the WiFly QA5 IP and is the answer not in the manual?
Questions and answers