ADJ MEGA HEX PAR User Instructions
Hide thumbs Also See for MEGA HEX PAR:

Advertisement

MEGA HEX PAR
User Instructions
9/17

Advertisement

Table of Contents
loading

Summary of Contents for ADJ MEGA HEX PAR

  • Page 1 MEGA HEX PAR User Instructions 9/17...
  • Page 2 All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
  • Page 3: Table Of Contents

    FEATURES............4 WARRANTY REGISTRATION......5 INSTALLATION..........6 DMX SET UP..........7 OPERATING INSTRUCTIONS......9 MASTER-SLAVE CONFIGURATION....12 UC IR/AIRSTREAM IR CONTROL....13 DMX CHANNEL MODES.........14 DIMMER CURVE CHART.........23 DIMENSIONAL DRAWING.......24 FUSE REPLACEMENT........25 WARRANTY............26 SPECIFICATIONS..........27 ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 2...
  • Page 4: Introduction

    Introduction: The ADJ Mega HEX Par is a DMX intelligent, high powered LED par fixture. This fixture can be used in a stand alone set up or connected in a Master/Slave set up. The Mega HEX Par has five operating modes: Sound Active mode, Auto Run mode, RGBWA+UV Dimmer mode, Static Color mode, and DMX controlled.
  • Page 5: Features

    Mega HEX Par Warranty Registration The Mega HEX Par carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
  • Page 6 C. The fixture has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. E. The fixture has fallen and/or subjected to extreme handling. ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 5...
  • Page 7 INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE. ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 6...
  • Page 8: Dmx Set Up

    DMX-512 protocol. The Mega HEX Par has 5 DMX channel modes. The DMX address is set on the back panel of the Mega HEX Par. Your unit and your DMX controller require a standard 3-pin XLR connector for data input and data output (Figure 1).
  • Page 9 Pin 1 Data Compliment (- signal) Pin 2 Pin 2 Data True (+ signal) Pin 3 Pin 3 Not Used Do Not Use Not Used Do Not Use ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 8...
  • Page 10: Operating Instructions

    “FS.15” (fastest flash). Sound Active Mode: In this mode the Mega HEX Par will react to sound, and chase through the different colors. 1. Plug the fixture in and press the MODE button until “SoXX” is displayed. “XX” represents the sound active mode (1-16) currently displayed.
  • Page 11 Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs. The Mega HEX Par has 5 DMX modes: 6 Channel mode, 7 Channel mode, 8 Channel mode, 11 Channel mode, and a 12 Channel mode.
  • Page 12 This function is used to activate and deactivate the IR sensor. When this function is activated you can control the fixture using either the ADJ UC IR or Airstream App. Please see page 14 for the con- trols and functions.
  • Page 13: Master-Slave Configuration

    3. Set the “Master” unit to your desired mode of operation. On the “Slave” unit’s press the MODE button until “SLAv” is displayed. The “Slave” unit(s) will now follow the “Master”. ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 12...
  • Page 14: Uc Ir/Airstream Ir Control

    The UC IR infrared remote gives you control of various functions (See below). To control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away. To use the ADJ UC IR you must first activate the fixtures infrared sensor, to activate the sensor please see the instructions on page 11.
  • Page 15 0 - 255 0% - 100% AMBER 0 - 255 0% - 100% 0 - 255 0% - 100% MASTER DIMMER 0 - 255 0% - 100% ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 14...
  • Page 16 LED ON 128 - 159 PULSE STROBING SLOW - FAST 160 - 191 LED ON 192 - 223 RANDOM STROBING SLOW - FAST 224 - 255 LED ON ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 15...
  • Page 17 0 - 51 DIMMING MODE 52 - 102 COLOR MACRO MODE 103 - 153 COLOR CHANGE MODE 154 - 204 COLOR FADE MODE 205 - 255 SOUND ACTIVE MODE ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 16...
  • Page 18 COLOR FADE 12 192 - 207 COLOR FADE 13 208 - 223 COLOR FADE 14 224 - 239 COLOR FADE 15 240 - 255 COLOR FADE 16 ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 17...
  • Page 19 Channel 11 will control the color fade speed. When Channel 9 is between the values of 205-255, Channel 10 is in Sound Active Mode, and Channel 11 will control the sound sensitivity. ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 18...
  • Page 20 0 - 51 DIMMING MODE 52 - 102 COLOR MACRO MODE 103 - 153 COLOR CHANGE MODE 154 - 204 COLOR FADE MODE 205 - 255 SOUND ACTIVE MODE ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 19...
  • Page 21 COLOR FADE 12 192 - 207 COLOR FADE 13 208 - 223 COLOR FADE 14 224 - 239 COLOR FADE 15 240 - 255 COLOR FADE 16 ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 20...
  • Page 22 Channel 11 will control the color fade speed. When Channel 9 is between the values of 205-255, Channel 10 is in Sound Active Mode, and Channel 11 will control the sound sensitivity. ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 21...
  • Page 23 Mega HEX Par Color Macro Chart ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 22...
  • Page 24: Dimmer Curve Chart

    The maximum that can be connected is 20 fixtures @ 120V and 36 fixtures @ 240V. After the maximum connected fixtures you will need to use a new power outlet. NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE MEGA HEX PAR AS THE POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!
  • Page 25: Dimensional Drawing

    Mega HEX Par Dimensional Drawing 8.14”/207mm 6.88”/175mm 3.93”/100mm ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 24...
  • Page 26: Fuse Replacement

    3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi- due, dust, dew). ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 25...
  • Page 27: Warranty

    ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
  • Page 28: Specifications

    Mega HEX Par Specifications Model: Mega HEX Par Voltage: 100V ~ 240V/50~60Hz LEDs: 5 x 10W 6-in-1 HEX LED’s Beam Angle: 25 Degrees Working Position: Any safe working position Power Draw: Power Linking: 20 Fixtures Max. @ 120V 36 Fixtures Max. @ 240V...

Table of Contents