ADJ WiFly NE1 User Instructions page 9

WiFly NE1
Firmware Version
Note:This is a read only menu option that will display the con-
trollers current software version.
1. Press the SET-UP button for two seconds to enter the main
menu.
2. Turn the DIAL/ENTER dial to menu option 16 (Firmware Ver-
sion). Press the DIAL/ENTER dial to enter. Press the ESC/PAGE
button to exit.
Fixture Control, Saving, & Playing Memories
Note: Although the generic profiles may work for you, it is rec-
ommended that you load and use the custom profiles that were
provided on the USB sitck that was included with your control-
ler. The custom profiles may offer you additional control and
features that the generic profiles do not include. If you wish to
use the custom profiles, please refer to the LOADING FIXTURE
PROFILES section of this user manual and load them before
proceeding. After you have patched your fixtures, you can con-
trol and save memories using the following steps.
1. Press the FIXTURE button then select the fixtures, using the
FUNCTION 1-12 buttons, that you want to control. If you are
using multiple fixtures of the same type and want to control
them at the same time, you can press the first and last buttons
so all fixtures in between are selected at the same time. For ex-
ample, I have patched 6 fixtures on buttons 1-6, to select them
all quickly, I would simultaneously press buttons 1 & 6 so all 6
fixtures are selected.
2. Press the COLOR button and add a color by using the
FUNCTION 1-12 buttons. Turn the DIAL/ENTER dial to switch
between two pages of preset colors (Note: your fixture must
support this feature to function).
3. Press the GOBO button and add a gobo by using the FUNC-
TION 1-12 buttons. Turn the DIAL/ENTER dial to switch be-
ADJ Products, LLC www.adj.com - WiFly NE1
WiFly NE1
Operation
tween two pages of preset gobos (Note: your fixture must sup-
port this feature to function).
4. Press the EFFECT button and add an effect by using the
FUNCTION 1-12 buttons. Turn the DIAL/ENTER dial to switch
between three pages of effects. In the display, you will see ML
EFFECT (for moving lights) and RGB EFFECT 1 and RGB EF-
FECT 2 (for RGBWA+UV LED's) plus the speed, phase, size,
and direction settings, which can be controlled from the four
EFFECT rotary dials. You can pause an effect at any time by
pressing the PAUSE button. (Note: your fixture must support
this feature to function).
5. Press the SHOW button and enable a show by using the
FUNCTION 1-12 buttons. (Note: your fixture must support this
feature to function).
6. You can also set all channel values manually. If you have
already set your scene and want to store it. please see step 7
now. To make manual channel adjustments, press the FIXTURE
button, then press the DIAL/ENTER dial for two seconds, the
display will list channels 1-4 along with their current values.
Use the four EFFECT dials to adjust each channel listed in the
display. Channels are displayed four at a time. To access ad-
ditional channels, turn the DIAL/ENTER dial clockwise and
counter-clockwise.
7. To save your current output, press and hold down any of the
six MEMORY buttons until the display reads "Operation Com-
plete!". Press that same MEMORY button a second time to
playback from that memory location, it should illuminate solid
green. Repeat steps 1-6 to store additional memories. There
are two memory banks. To access the secondary memory bank
press the ESC/PAGE button. If there is a memory running, that
MEMORY button will flash letting you know that is actively run-
ning in the other bank. If your memory includes an "EFFECT",
you can pause the effect by pressing the PAUSE button.
Page 16
ADJ Products, LLC www.adj.com - WiFly NE1
Operation
Page 17