English - Kenwood FDP22.130GY Instructions Manual

English

Safety
Read these instructions carefully and retain for future reference.
Before using for the first time, remove all packaging and any labels,
including plastic blade covers. Wash the parts: see 'Cleaning'.
If the plug or cord is damaged it must, for safety reasons, be replaced by
Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
DO NOT touch the sharp blades. The blade and disc are very sharp,
handle with care. Always hold by the finger grip at the top, away from
the cutting edge, when handling the sharp cutting blades, emptying the
bowl and during cleaning.
This appliance is not suitable for processing ice cubes.
Before lifting or carrying the appliance by the handle on the lid, always
check that the bowl and lid are securely locked in place.
Ensure the cord is fully unwound before using the appliance.
DO NOT process hot ingredients.
Be careful if hot liquid is poured into the food processor bowl as it can
be ejected out of the appliance due to sudden steaming.
Never leave the appliance unattended when it is operating.
Do not move appliance whilst in operation.
Do not exceed the maximum capacities stated in the recommended usage
chart.
Do not operate your appliance for longer than 30 seconds when
processing dough without a rest period. Processing continuously for
longer periods can damage your appliance.
Always remove the knife blade before pouring contents from the bowl.
Keep hands and utensils out of the processor bowl whilst connected to the
power supply.
If food needs to be pushed down use a suitable utensil such as a spatula.
Always switch off the appliance and disconnect from the supply if it is left
unattended and before assembling, disassembling or cleaning.
CAUTION: Before removing the lid from the bowl wait until the
attachment/blades have completely stopped.
Never use your fingers to push food down the feed tube. Always use the
pusher supplied.
Do not use excessive force to push food down the feed tube – you could
damage your appliance.
Do not use the lid lock to operate the processor, always use the on/off
speed control.
Do not operate the processor with the both the knife blade and disc fitted.
Use only one attachment at a time.
This appliance will be damaged and may cause injury if the interlock
mechanism is subjected to excessive force.
Never use an unauthorised attachment.
Never use a damaged appliance. Get it checked or repaired: see 'Service
and customer care'.
2