113: Close Cover To Continue; 114: Cover Opened During Job; 116: Magstripe Not Available - DataCard CD800 User Manual

113: Close cover to continue

The cover is open or the print ribbon cartridge is missing.
Confirm that the print ribbon cartridge is installed and then close the cover.
Press the U button on the printer to clear the message. On the PC, click OK, or click Cancel to
SER
cancel the card.
H & T
INTS IPS
Make sure that the ribbon cartridge is installed properly with the cartridge handle even with

the edges of the printer.
Press down on the cover ridges to make sure that the cover latches properly on both sides.


114: Cover opened during job

The printer cover was opened while printing.
Push down on the cover to latch it.
Press the U button on the printer to clear the message. On the PC, click Retry, or click Cancel
SER
to cancel the card.
H & T
INTS IPS
Make sure that the ribbon cartridge is installed properly with the handle even with the edges

of the printer.
Press down on the cover ridges to make sure that the cover latches properly on both sides.


116: Magstripe not available

The printer does not have a magnetic stripe option. The card will be canceled.
Remove magnetic stripe data from the card or use a printer that has a magnetic stripe option
installed.
Press the U button on the printer, or click OK on the PC to clear the message.
SER
H & T
INTS IPS
To remove magnetic stripe data, you or your system administrator may need to:
Clear a check box in the card production application.

Change the font from Mag Trackx XPS Card Printer to a printable font such as Arial, Verdana,

or Calibri. Refer to "Magnetic Stripe Fonts" in your printer's Driver Guide.
70 Troubleshooting