Close The Status Monitor; Printer Status Tab - DataCard SR200 User Manual

Close the Status Monitor

To close the Status Monitor:
Tips for Success

Printer Status tab

The Status tab shows:
28
Run As dialog box, enter the name and password for a user name with
Administrator permissions.
— The first time you start the Status Monitor on
PC with the Windows Firewall enabled, a
Windows Security Alert dialog box will appear.
Click to use the Status Monitor. If you
Unblock
choose
Keep Blocking
want the Status Monitor to run, you must
uninstall the Status Monitor, restart Windows,
and install it again.
To start the Status Monitor without Administrator permissions, click the icon to open
3
it. A prompt appears to tell you that you cannot change settings. Click
continue.
The Status Monitor window opens.
4
1 Click the red Close button.
A prompt asking if you want to close the Status Monitor appears. Click
2
Yes.
• When you close the Status Monitor, communication between the
printer and driver becomes one way, with the driver sending cards to
the printer.
To keep the Status Monitor running without viewing it, click the
•
Minimize button.
• The type of ink ribbon, the approximate
percentage remaining, and the lot number.
• The type of retransfer film and the
approximate percentage remaining.
• The resettable print count and a Clear button
to set it to zero (0).
• The printer name. If more than one printer is
installed, choose the printer to work with using
the
Printer Selection Name
Update button to search for additional SR200
& SR300 printers. The information changes
automatically when you choose another
printer. Only printers on the same subnet as
the PC can be found.
• Enough is displayed when cards are present in the hopper. None is displayed
when no cards are present.
and decide that you
list. Click the
SR200 & SR300 Printer User Guide
to
OK