219: Impresser Sensor Problem; 220: Impresser Heater Problem; 221: Bar Code Scanner Problem; 222: Firmware Version Mismatch - DataCard CD800 User Manual

219: Impresser sensor problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.

220: Impresser heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.

221: Bar code scanner problem

The bar code scanner cannot read the bar code on the overlay. This can indicate a scanner
problem, an unreadable bar code, or an incorrect L1 cartridge.
Try the card again.
If the problem occurs again, request service.

222: Firmware version mismatch

The printer and laminator firmware versions are not compatible. The system cannot laminate
cards until the firmware has been updated.
Update both the printer and laminator to the latest firmware versions.

223: Laminator system mismatch

The printer and laminator are not compatible.
The laminator is not supported by your printer model. Contact your service provider for the
correct laminator model.
CD800 Card Printer User's Guide
button to power off the system.
OWER
button to power off the system.
OWER
79