DataCard CD Series Repackaging For Shipment

Hide thumbs Also See for CD Series:

CD Series Printer Repackaging for Shipment

The following procedures are required for preparing the CD series printer unit for

shipment.

Press the power button to power off the printer.

The front panel on the printer powers off.

Disconnect the network or USB cable (the cable is not required for shipment).

Unplug the power cord from the printer.

CD Series Printer Repackaging for Shipment

Power Button

527440-001 Rev. A

Table of Contents

Need help?

Do you have a question about the CD Series and is the answer not in the manual?

Page 1 CD Series Printer Repackaging for Shipment The following procedures are required for preparing the CD series printer unit for shipment. Press the power button to power off the printer. Power Button The front panel on the printer powers off. Disconnect the network or USB cable (the cable is not required for shipment).
Page 2 (unlocked). Disconnect the data cable from the laminator to the printer. Lift the printer off of the laminator and place the printer in a stable position. Close and lock the laminator. Lock Unlock CD Series Printer Repackaging for Shipment...
Page 3 Pack and secure the printer. CD Single-hopper printer only: Place the foam caps on the front and back of the printer and set it in the shipping carton. Secure the shipping carton with shipping tape. CD Series Printer Repackaging for Shipment...
Page 4 Secure the shipping restraint behind the multi-hopper. iii. Close and lock the printer. Pack the printer. Place the foam caps on the front and back of the printer and center it on the unfolded box. CD Series Printer Repackaging for Shipment...
Page 5 Place the cover on top of the box. Secure the box for shipping. Insert and close the two plastic handles to secure the cover to the box. Wrap shipping tape around the box and cover to secure the container for shipping. CD Series Printer Repackaging for Shipment...