Outside The Laminator; Laminator Back And Left Side - DataCard CD800 User Manual

Outside the Laminator

Use the following information to become familiar with the laminator.

Laminator Back and Left Side

Card Entry
Area
Printer
Mounting Pin
Reject Card
Tray
Laminator Power
Connection
Printer Mounting Pins
Printer Mounting Lock
Laminator Status Light
Card Entry Area
Reject Card Tray
Laminator Power
Connection
A-2
The pins align the printer with the laminator.
The lock secures the printer to the laminator.
The light shows the status of the laminator. Refer to
"Laminator Status Light" on page
The card entry area receives the card from the printer and
places it into position for laminating.
Unfinished cards or cards not processed properly are placed
in the reject card tray.
The power connection provides a plug‐in connector for the
laminator power supply.
Printer Mounting
Pins
Laminator Status
Light
Printer Mounting
Lock
A‐3.
CLM Laminator