Load And Replace Supplies; Load Cards; Single Hopper - DataCard CD800 User Manual

Load and Replace Supplies

To prepare the printer to print cards, load blank card stock into the input hopper, and load print
ribbon and a cleaning sleeve onto the print cartridge.
If your system includes the optional laminator, also load overlay material into the L1
and L2 (if equipped) laminators. Refer to "Load Laminator Overlay Material" on
page A‐9, for information about loading the laminator cartridges.

Load Cards

Do the following to load cards in the printer.

Single Hopper

1.
Unlock the printer, if necessary, and open the
input hopper.
2.
Load the cards into the input hopper. (Cards
can stick together. Slide or fan the cards to
separate the edges before placing them in the
input hopper.)
Insert ISO magnetic stripe cards with the

stripe (back side) facing down and to the
right.
Insert smart cards with the smart card chip facing up and toward the back of the hopper.

3.
Close the input hopper and lock the printer, if necessary.
CD800 Card Printer User's Guide 23